Werbung
Raccordement
Utilisez une source de tension continue de 12 volts de
sortie. N'essayez jamais de brancher la caméra sur une
autre tension.
La source de tension continue doit fournir un courant
minimum de 150 mA. Ne surchargez jamais la source
de tension.
La caméra est branchée au moniteur/téléviseur au moyen d'un
câble cinch. La caméra est munie d'une douille basse tension pour
la raccorder à la source de tension.
Couleurs des douilles:
jaune:
noir:
Connectez la source de tension continue à la douille basse
tension (6).
Attention: La source de tension doit être déconnectée.
Connecteur : 5,5 / 2,1 mm
Respectez la polarité .
Vérifiez la bonne polarité, le cas échéant, au moyen d'un instrument
de mesure.
Raccordez l'entrée vidéo à la douille cinch (5).
28
signal vidéo
alimentation du courant
Direct sunlight or bright lighting, etc. could strongly affect the cam-
era picture and make it difficult to watch the picture.
Note: Take care in selecting the place where to install the camera.
Look for an appropriate location for the camera where it can monitor
it.
We recommend that the camera lens (3) be installed at a level of abt.
1.8 metres.
Note: The level of installation depends on the object that requires
monitoring.
Use the holes to mount the camera leg in as a drilling jig.
Attention: Make sure no electric lines, water pipings, etc. are at the
points to drill holes in.
Screw on the installation leg using the enclosed screws.
Note:
Use wall anchors, if necessary.
Use a suitable screw-driver.
Screw the thread (2) of the camera on to the installation leg and fix
the scrwed joint in place using a locknut.
How to connect the camera
Use a 12 volts output direct-current source as a power
supply. Never try to operate the colour-fast weather-
resistant digital camera at a voltage other than the one
prescribed.
The direct-current source should be capable of supply-
ing a current of at least 150 mA as a minimum capacity.
Never overload the voltage source.
17
Werbung
Kapitel
Fehlerbehebung
