After Finishing Work; Transporting; Transporting The Ride-On Mower; Storing - Stihl Rt 4097.1 Sx Gebrauchsanleitung

English
11.7.2 Blade brake clutch
11.7.2.1 Engaging the blades
NOTICE
If the blades are not engaged as described in
this User Manual, they may be damaged.
► Do not engage the blades when driving in
tall grass.
► Do not engage the blades in the lowest cut‐
ting height.
► Only engage the blades at the maximum
engine speed.
NOTICE
When you engage the blades while driving, the
engine speed drops briefly.
► Start the engine,
► Set the throttle lever to the "MAX" position,
11.3.
► Select the highest cutting height,
To mow in the forward direction:
► Select the forward direction of travel,
11.4.3.
► Press the mowing deck switch for at least
1 second.
This engages the blades.
To mow in reverse:
► Select the reverse direction of travel,
11.4.3.
► Press the safety switch for mowing in reverse.
► Press the mowing deck switch for at least
1 second.
This engages the blades.
11.7.2.2 Disengaging the mowing deck
► Select the highest cutting height,
► Press the mowing deck switch for at least
1 second.
After 5 seconds, the blades come to a standstill.
The engine continues to run.
11.8

After Finishing Work

11.8.1 After finishing work
► Park the ride-on mower on a level surface.
► Shut off the engine,
► Engage the parking brake,
► Remove the ignition key and store it securely.
► If the ride-on mower is wet: Allow the ride-on
mower to dry.
► Clean the ride-on mower,
64
9.1.
11.6.
11.6.
9.2.
11.5.1.
14.1.

12 Transporting

12.1

Transporting the ride-on mower

► Place the ride-on mower on a level surface.
► Select the highest cutting height,
Transporting the ride-on mower with a means of
transport
► Secure the means of transport against tipping
over.
► Position the loading ramps, set according the
track width and the wheelbase of the ride-on
mower, against the means of transport so that
the ramps cannot shift.
► Carefully drive the ride-on mower over the
loading ramps or from the lifter onto the
means of transport.
► Select the lowest cutting height,
► Shut off the engine and allow it to cool down,
9.2.
► Push the ride-on mower forward until the
bumper touches the end panel of the means of
transport.
► Engage the parking brake,
► Remove the ignition key and store it securely.
► Close the fuel cock.
► Use suitable fasteners to attach and secure
the ride-on mower to the means of transport.
► Position suitable wedges under the wheels of
the ride-on mower so that the ride-on mower
cannot move.

13 Storing

13.1 Storing the ride-on mower
► Place the ride-on mower on a level surface.
► Shut off the engine,
► Engage the parking brake,
► Remove the ignition key and store it securely.
► The ride-on mower should be stored so that
the following conditions are met:
– The ride-on mower is in a safe condition.
– The ride-on mower is out of the reach of
children.
– The ride-on mower is clean and dry.
– The ride-on mower cannot inadvertently be
set in motion.
– The fuel cock is closed.
12 Transporting
11.6.
11.6.
11.5.1.
9.2.
11.5.1.
0478-192-9614-A