Troubleshooting - Scheppach Tiger 2500 Original Bedienungsanleitung

16. Troubleshooting

Problem
Engine does not run.
The engine starts
slowly and does not
reach the operating
speed.
Engine producing
excessive noise.
Engine does not reach
full power.
Motor overheats
easily.
30 | GB
Possible causes
Engine, cable or connector
defective, fuses burnt.
Voltage too low, coils damaged,
capacitor burnt.
Coils damaged, motor defective.
Circuits in the network are
overloaded (lamps, other motors,
etc.).
Overloading of the engine,
insufficient cooling of the engine.
www.scheppach.com
Remedies
Have the machine checked by a specialist. Never
repair the engine yourself. Attention! Check the
fuses and replace them if necessary.
Have the power supply company check the voltage.
Have the engine checked by a specialist. Have the
capacitor replaced by a specialist.
Have the engine checked by a specialist.
Do not use any other devices or engines on the
same circuit.
Avoid overloading the engine during grinding and
remove dust from the engine to ensure optimum
engine cooling.