Technical Data; Remarques Générales - Kärcher Rvc 3 Base Originalbetriebsanleitung

Fault
The cleaning robot is not
returning to the charging
station
Suction does not start or
does not work properly
Cleaning robot picks up
less dirt
Warranty
The warranty conditions issued by our relevant sales
company apply in all countries. We shall remedy possi-
ble malfunctions on your appliance within the warranty
period free of cost, provided that a material or manufac-
turing flaw is the cause. In a warranty case, please con-
tact your dealer (with the purchase receipt) or the next
authorised customer service site.
(See overleaf for the address)
Further warranty information (if available) can be found
in the service area of your local Kärcher website under
"Downloads".

Technical data

Dimensions and weights of charging station
Weight
Length x width x height
Device performance data
Filter bag capacity
Electrical connection
Nominal voltage (input)
Frequency
Nominal voltage (output)
Rated current (output)
Cause
Battery is discharged.
The cleaning robot is too far away from
the charging station.
Not enough space around the charging
station.
There are too many obstacles around the
charging station.
The cleaning robot remaps its environ-
ment when it has been moved over a
longer distance.
The cleaning robot was not started from
the charging station. In this case, it only
returns to the place from which it was
started.
Station is not plugged in.
Cleaning robot not correctly on station.
The time since the last suction is too
short.
Dust bag not present or inserted incor-
rectly.
The cover of the suction station is open. 1. Close the cover of the station completely.
Dirt on the exhaust air flap in the dust
container.
RVC 3 Comfort
Station
1,8
kg
21 x 16,5 x
cm
26
l 4
V 220-240
Hz 50-60
V 20
0,8
A
Rectification
1. Manually place the cleaning robot on the
charging station and let it charge complete-
ly.
1. Move the cleaning robot closer to the
charging station.
2. Manually place the cleaning robot on the
charging station.
1. Ensure that there is sufficient space
around the charging station, see chapter
Setting up the station.
1. Place the charging station in a more open
area, see chapter Setting up the station.
1. Manually place the cleaning robot on the
charging station.
1. Manually place the cleaning robot on the
charging station.
1. Plug in the power cable of the station.
1. Place the cleaning robot on the station
manually.
1. Try again after 2 minutes.
1. Insert the dust bag or check that the bag is
fitted correctly.
1. Remove and clean the dust container.
Rated power (suction)
Subject to technical modifications.
Remarques générales.........................................
Consignes de sécurité.........................................
Symboles sur l'appareil .......................................
Utilisation prévue.................................................
Protection de l'environnement.............................
Accessoires et pièces de rechange ....................
Etendue de livraison............................................
Description de l'appareil......................................
Description fonctionnelle .....................................
Mise en service ...................................................
Transport.............................................................
Stockage .............................................................
Entretien et maintenance ....................................
Dépannage en cas de défaut ..............................
Garantie ..............................................................
Caractéristiques techniques................................
Remarques générales
Veuillez lire ce manuel d'instructions ori-
ginal avant la première utilisation de
votre appareil et agissez conformément.
Conservez le manuel d'instructions original pour une
utilisation ultérieure ou pour le propriétaire suivant.
Français
RVC 3 Comfort
Station
400
W
Contenu
9
10
10
10
10
10
10
10
11
11
11
11
11
11
12
12
9