Temperature Warning Function - Renkforce Rf-6701490 Bedienungsanleitung

10.10 Temperature warning function

This feature alerts you when the temperature exceeds the preset limits.
If the temperature warning function is disabled, no warning symbol
HIGH or
(
Press and hold the –/MEM/RCC button (7) or the +/CH button (8) to
change the values quickly.
The temperature warning settings mode ends automatically if no button is
pressed within 20 seconds. The settings are automatically saved.
1. Press and hold the ALERT button (9) for about 3 seconds to enter temperature
warning settings mode.
2. Press the ALERT button (9) to configure the settings in the following sequence:
Indoor alert on/off
Indoor high temperature
Indoor low temperature
Outdoor channel 1 alert on/off
Outdoor channel 1 high temperature
Outdoor channel 1 low temperature
Outdoor channel 2 alert on/off
Outdoor channel 2 high temperature
Outdoor channel 2 low temperature
Outdoor channel 3 alert on/off
Outdoor channel 3 high temperature
Outdoor channel 3 low temperature
Exit
3. Press the –/MEM/RCC button (7) or the +/CH button (8) to change the values.
4. Press the ALERT button (9) to confirm the setting.
5. When a preset threshold is reached, a warning symbol (
flashes on the display (1) and a warning tone sounds.
44
LOW) is shown on the display (1).
HIGH or LOW)