Renkforce RF-6701490 Bedienungsanleitung Seite 35

Do not touch the power adapter if there are any signs of damage, as this may
cause a fatal electric shock! Take the following steps:
– Switch off the mains voltage to the socket containing the power adapter
(switch off the corresponding circuit breaker or remove the safety fuse, and
then switch off the corresponding RCD protective switch).
– Unplug the power adapter from the mains socket.
– Use a new power adapter of the same design. Do not use the damaged
adapter again.
Ensure that cables are not pinched, kinked or damaged by sharp edges.
Always lay cables so that nobody can trip over or become entangled in them.
This poses a risk of injury.
35