Setting Up Or Mounting The Outdoor Sensor; Setting Up The Radio Controlled Clock (Rcc); Changing The Display Settings - Renkforce Rf-6701490 Bedienungsanleitung

10.4 Setting up or mounting the outdoor sensor

Hang the outdoor sensor on a hook, nail or screw on the wall using the opening for
wall-mounting (12) on its rear side.
The outdoor sensor should be installed in a location that is not exposed to
direct sunlight to prevent inaccurate readings. Direct exposure to rain or snow
will also result in inaccurate readings.

10.5 Setting up the radio controlled clock (RCC)

1. After the outdoor sensor is paired, the weather station auto-searches for the
time signal:
Symbol
flashes
remains steady
disappears
2. Press and hold the –/MEM/RCC button (7) to manually start the search, and
press this button again to end the search.

10.6 Changing the display settings

To adjust the settings, proceed as follows:
1. Press and hold the SET/ button (10) for about 3 seconds to access the set-
tings mode.
The first setting changes the languages.
The current setting flashes on the display (1).
2. Press the –/MEM/RCC button (7) or the +/CH button (8) to cycle through
language options in the following sequence:
English
Dansk
Dutch
40
Time signal
Receiving in progress
Successfully received
Not received