Control Panel Presentation - Masterpro Bgmp-9443 Gebrauchsanweisung

EN

CONTROL PANEL PRESENTATION

NOTES:
functions are provided: French fries, Steak, Chicken drumstick, Fish, Bread, Shrimp,
Cake and Vegetables. Finger-touch menu button to choose and change the cooking function. More
flexible time & temperature settings can be adjusted, and adjustments can be made easily by touching
corresponding icons. When you want to adjust the time, kindly press the time icon on the screen first,
then press the icons to increase/decrease 1 minute per press. When you want to adjust the
temperature, kindly press the temperature icon on the screen first, then press the icons to Increase/
Decrease 5 degrees per press.
MENU PRESETTING
Menu Icon Button
Default /
French fries /
Steak /
Chicken
/
drumstick
Fish /
Bread /
Shrimp /
Cake /
Vegetables /
Temp Range 80℃~200℃
Time Range 1min~60min
Default Temp Default Time Shake
180℃ 15min Shake
200℃ 22min Shake
200℃ 10min Shake
200℃ 25min Shake
190℃ 10min Shake
160℃ 18min
160℃ 18min Shake
160℃ 25min
180℃ 10min Shake
/ /
/ /
6
After choosing the function, please finger-press Start/Pause to start cooking
NOTES:
during the hot air frying process, the LED lamp will be running, then if you want to change
to another cooking recipe, for example, now you are cooking Bake function, please press the Start/
Pause button ; the LED lamp will be blinking. Here, this button acts as a pause function. In the
pause state, you can change the menu to choose another presetting. Then, you press this button
again, the air fryer will continue cooking. Here, this button acts as a re-start function.
During the cooking process, you can adjust the time and temperature.
Menu button: touch these different cooking icons to choose different cooking functions. After you
choose the cooking icons, press the Start/Pause button
want to change fries to cake, then first press the Start/Pause button
to switch to a different cooking function.
Shake indicator: the shake indicator will blink when the cooking cycle has reached its halfway point.
This halfway time allows you to shake or flip your food in an appliance, which helps ensure even
cooking.
NOTE:
if you do not remove the basket and shake the food, the shake light on the control panel will
remain blinked.
Some ingredients are required to be shaken halfway through the preparation time (see section
'Settings' in this chapter). In this way, pull the basket out of the pan by the handle and shake it. Then
put the basket into the pan and slide the pan back into the air fryer.
The machine will have an auto-ready bell after cooking. When you hear the bell 5 times, this means the
cooking cycle is finished. Pull the pan out of the appliance and place it on the heat-resistant holder.
NOTE:
after the time ends, the heating element stops working, but the fan will continue to run for
about 20 seconds to blow away the hot air for safety. Finally, the timer bell will ring 5 times as the
ending alarm.
Check if the ingredients are ready.
NOTE:
if the ingredients are not ready yet, simply slide the basket back into the appliance. Press
the temperature control knob to adjust the Temperature setting and press the Timer control knob to
adjust the time setting. And then press the Start knob to run the appliance.
To remove ingredients, (e.g. beef, chicken, meat, any ingredients with original oil and will have excess
oil from ingredients collected on the bottom of the basket), please use tongs to pick ingredients one
by one.
NOTE:
do not turn the pan over, the oil collected on the bottom of the pan will leak onto the
/
ingredients.
To remove ingredients (e.g. chips, vegetables or ingredients with no excess oil from the ingredients),
please release the basket, and pour ingredients into tableware.
/
When a batch of ingredients is ready, the fryer is instantly ready for preparing another batch.
/
/
. When during the cooking period, if you
, then touch this menu button
7
EN