Camera Name
Allows you to enter a name for your
camera that will appear on the image
time stamp. Press the OK button to
choose "Input" and go to the name
input screen. If necessary, select
the arrow in the upper right of the
keyboard to erase the current camera
name, then enter the new name using
the arrow buttons and keyboard.
Press the OK button to select a letter.
Press MENU to save the name to
memory.
Video Size
Selects video resolution.
3840x2160: Maximum resolution,
takes up the most space on your SD
card.
1920x1080: The recommended default
resolution, clear resolution without
filling up your SD too fast.
1280x720: Lowest resolution. Good for
videos when resolution is not critical.
Note: We recommend SanDisk® SDHC
class 10 or higher.
Video Length
Sets length per video clip. 10 seconds
is the recommended default. Press OK
to see other options.
Nighttime limit of 15 seconds when
Illumination Mode = "Long Range". The
"Dynamic" setting provides a variable
video length, based on animal activity
within PIR range and your Interval and
Illumination Mode settings.
16
Delay
Selects the length of time that the
camera will "wait" until it responds to
any additional triggers from the PIR.
Settings begin with 10 second default
when parameter is first selected. To
choose other intervals, press OK, and
select by using the arrow buttons.
The shorter your delay, the more
images you'll get.
Sensor Level
Auto sensor level will automatically
adjust the sensor level depending on
the surrounding temperature.
Auto: Automatically sets sensor level
based upon temperature.
High: Recommended when air
temperature is above 70° or when
maximum range is desired.
Med: Recommended when air
temperature is 45-70° or when range
is up to 70'.
Low: Recommended when air
temperature is below 45° or when
range is up to 40'.
Camera Mode
Allows you to limit operation to day or
night period if desired.
Day: Only captures images at daytime.
Night: Only captures images at
nighttime.
24hrs: Captures pictures day and night.
17