Herunterladen Inhalt Inhalt Diese Seite drucken

Bushnell CORE DS-4K Bedienungsanleitung Seite 6

Vorschau ausblenden Andere Handbücher für CORE DS-4K:
Inhaltsverzeichnis
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 53
MOUNTING & POSITIONING
After you've set up the camera's settings to your
preferences, you're ready start capturing images.
We recommend mounting the camera on a sturdy tree or
post with a diameter of about 6 in. To get the optimal picture
quality, the camera should be about 16-17 ft. away from the
place to be monitored, with the camera placed at a height of
3.5-5 ft. Also, keep in mind that you will get the best results
at night when the subject is within the ideal flash range, no
farther than 80' and no closer than 10' from the camera.
The height away from the ground for placing the device
should vary with the animal size appropriately. In general, 3
to 6 feet is preferred. You can avoid potential false triggers
due to temperature and motion disturbances in front of
the camera by not aiming it at a heat source or nearby tree
branches or brush (especially on windy days).
There are two ways to mount the camera:
• Using the provided adjustable belt: Push one end of the belt
through the two slots on the back of the trail camera. Thread
the end of the strap through the buckle. Fasten the belt
securely around the tree trunk by pulling the end of the strap
firmly so there is no slack left.
Strap Channel
10
• Using the tripod socket:
The camera is equipped with
a socket at the back (below
the strap brackets) to enable
mounting on a tripod or other
camera mounting accessories
that have a standard 1/4"-20
thread.
USING A SOLAR PANEL ACCESSORY
You can connect an optional Solar Panel accessory
(model# 119986C) – please visit www.bushnell.com for
more information) to the "DC In" jack on the bottom of your
camera.
Strap Buckle
Other external power supplies should not be used, as the
camera and/or display may not function correctly. If the
solar panel is connected and AA batteries are installed, the
camera will be powered by the solar panel's rechargeable lith-
ion battery, as long as it provides adequate voltage (if not,
the camera will switch to battery power). The solar panel's
battery will power the camera at night.
11
Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Core s-4k119987m119949m

Inhaltsverzeichnis