Quick Start Guide - Bushnell Core Ds-4K Bedienungsanleitung

on
off
x6
6

QUICK START GUIDE

1. Make sure camera power
switch is in the OFF position.
2. Install 6 AA batteries (lithium
or alkaline, lithium batteries are
recommended).
3. Make sure the write-protect
switch on the side of the SD
card is "OFF" (not in the "Lock"
position.) Insert card (up to
512GB max). Do not insert or
remove an SD card with the
power switch in the ON position.
A "click" sound indicates the
card is installed properly.
on
off
Your camera is now ready to use at its default settings:
photo mode, 10 sec intervals between photos, medium
resolution, "Long Range" illumination mode. If you would like
to customize your settings, see the Settings Menu section.
If you have questions, call Customer Service: 800-423-3537
4. Switch the power ON.
5. Set the date and time.
6. Mount the camera using the
tree strap.
7