Incident Display - Kessel SonicControl Anleitung Für Einbau, Bedienung Und Wartung

Please heed the safety instructions in chapter 1.

7.1 Incident display:

Events are displayed in the log and not forwarded via the potential-free contact.
Incident display
First initialisation
Parameters changed
Type of system changed
Servicing
Manual mode
Readout log book
Close down switch unit
Acknowledge acoustic alarm
Acknowledge fault
Default settings
Calibration successful
PRE-ALARM layer thickness
7. Errors and Malfunction
Cause
First initialisation
Parameters have been changed
Type of system has been changed
Servicing date has been entered
Manual mode has been entered
Log book has been read out
Switch unit has been closed down
Acoustic alarm has been acknowledged
Fault has been acknowledged
Reset to default settings
The device was calibrated during
first initialisation
The grease layer height for pre-alarm level
has been reached (refer also to 3.3)
Remedy
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
- -
54