Herunterladen Inhalt Inhalt Diese Seite drucken

Installation Dimensions Of Sensor - Kessel SonicControl Anleitung Für Einbau, Bedienung Und Wartung

Fettschichtdickenmessgerät
Vorschau ausblenden Andere Handbücher für SonicControl:
Inhaltsverzeichnis

Werbung

3.3 Installation dimensions of sensor

After installation and commissioning of an EasyClean grease separator with a control unit, the following two values for grease layer
thickness must be changed. Please do the following:
Enter the '3.1 Settings' section on the digital display of the control unit.
- Enter the access code – 1000
- 3.1.1 Alarm layer thickness (change to the appropriate value shown below)
- 3.1.2 Pre-Alarm layer thickness (change to the appropriate value shown below)
free
Article No.
Freie Auf-
standing
stellung
Artikelnummer
G
93002.01 /.02 /.11 /.12 /.21 /.22 /.31 /.32
93003.01 /.02 /.11 /.12 /.21 /.22 /.31 /.32
93004.01 /.02 /.11 /.12 /.21 /.22 /.31 /.32
93007.01 /.02 /.11 /.12 /.21 /.22 /.31 /.32
93010.01 /.02 /.11 /.12 /.21 /.22 /.31 /.32
98201 (Obere beiden Bohrlöcher der Bohrschablone verwenden)
98202 (Obere beiden Bohrlöcher der Bohrschablone verwenden)
D
93002.01 D /.02 D /.11 D /.12 D /.21 D /.22 D /.31 D /.32 D
93003.01 D /.02 D /.11 D /.12 D /.21 D /.22 D /.31 D /.32 D
93004.01 D /.02 D /.11 D /.12 D /.21 D /.22 D /.31 D /.32 D
93007.01 D /.02 D /.11 D /.12 D /.21 D /.22 D /.31 D /.32 D
93010.01 D /.02 D /.11 D /.12 D /.21 D /.22 D /.31 D /.32 D
98201.00/D1 (Obere beiden Bohrlöcher der Bohrschablone verwenden)
98202.00/D1 (Obere beiden Bohrlöcher der Bohrschablone verwenden)
Freie Auf-
stellung
Artikelnummer
DS
93002.01/DS, .02/DS, .31/DS, .32/DS
3. Installation and Assembly
NS
2
3
4
7
10
1
2
2
3
4
7
10
1
2
NS
2
Distance between the
Abstand Oberkante
upper edge of the
unterer Finger zu
lower "finger" and
Alarm level layer
Unterkante Auslauf
Alarmschichtdicke
the lower edge of the
thickness in cm
outlet (water line)
(Wasserlinie)
in cm
50 cm
14
50 cm
17
50 cm
17
50 cm
21
50 cm
21
58 cm
16
58 cm
16
50 cm
14
50 cm
17
50 cm
17
50 cm
21
50 cm
21
58 cm
16
58 cm
16
Abstand Oberkante
unterer Finger zu
Unterkante Auslauf
Alarmschichtdicke
40
(Wasserlinie)
in cm
50 cm
14
Recommended pre-
max. sludge layer in cm
max. Schlammschicht-
liminary alarm level in
( = 50% of sludgetrap
cm (= 2/3 of the max.
Voralarmschichtdicke
dicke in cm = 50% des
storage volume)
volume)
in cm bei 80%
Schlammfangvolumen
11
14
14
17
17
13
13
11
14
14
17
17
13
13
max. Schlammschicht-
Voralarmschichtdicke
dicke in cm = 50% des
in cm bei 80%
Schlammfangvolumen
11
22
29
30
35
38
46
54
22
29
30
35
38
46
54
22

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis