External Signal Generator; Electrical Connection; Potential-Free Switch Contact - Kessel SonicControl Anleitung Für Einbau, Bedienung Und Wartung

4.1 External signal generator

The external signal generator (order no. 20162) for transmitting
the acoustic warning to other rooms can be connected if required.
(see connection diagram).
4.2 Shortening the sensor cables
The sensor cables can be shortened if required. We only recom-
mend subsequently tin-plating the wire ends. When cable end
sleeves are used, care must be taken that the connection terminals
are designed for a max. cross-section of 2.5 mm
tion must not be exceeded.

4. Electrical connection

4.3 Potential-free switch contact

Fasten the potential-free contact to the connection terminals.
. This crosssec-
2
47
12