General Power Tool Safety Warnings; Work Area Safety; Electrical Safety; Personal Safety - Parkside Pdssa 20-Li B2 Originalbetriebsanleitung

General power tool
safety warnings
WARNING!
► Read all safety warnings, instruc-
tions provided with this power tool.
Failure to follow all instructions listed
and/or serious injury.
Save all warnings and instructions for
future reference.
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
Do not operate power tools in ex-
plosive atmospheres, such as in the
or dust. Power tools create sparks
Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control.

2. Electrical safety

Power tool plugs must match the out-
let. Never modify the plug in any way.
Do not use any adapter plugs with
earthed (grounded) power tools. Un-
reduce risk of electric shock.
Avoid body contact with earthed or
grounded surfaces, such as pipes, ra-
diators, ranges and refrigerators. There
is an increased risk of electric shock if
your body is earthed or grounded.
Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric
shock.
|
GB / IE
Do not abuse the cord. Never use the
cord for carrying, pulling or unplug-
ging the power tool. Keep cord away
from heat, oil, sharp edges or moving
parts.
increase the risk of electric shock.
-
When operating a power tool out-
doors, use an extension cord suitable
for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of elec-
tric shock.
If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected sup-
ply. Use of an RCD reduces the risk of
electric shock.
Stay alert, watch what you are doing
and use common sense when operat-
ing a power tool. Do not use a power
tool while you are tired or under the
tion.
personal injury.
Always wear eye protection. Protec-
hearing protection used for appropriate
conditions will reduce personal injuries.
Prevent unintentional starting. Ensure
connecting to power source and/or
battery pack, picking up or carrying
the tool. Carrying power tools with your
tools that have the switch on invites ac-
cidents.
Remove any adjusting key or wrench
before turning the power tool on.
wrench or a key left attached to a rotat-
personal injury.
-
-