Denver Villette E100 RM Benutzerhandbuch Seite 52

•
The battery can be recharged using a standard power outlet. You do not need to operate its
switch.
•
Insert the charger plug into the battery and plug the charger power cable into a nearby outlet.
•
When charging, the LED on the charger will be red to show that it is working correctly. When
the light goes green, the battery is charged.
•
To finish the charging, you must unplug the power plug and then the plug connected to the
battery. Close the cap on the battery plug.
Your battery's autonomy
This power assisted bicycle is equipped with a high-quality Li-ion battery. Li-ion batteries have no
memory effect charging and a wide temperature tolerance range of -10 to +40 °C.
To ensure maximum battery life and protection from damage, please follow the use and care
instructions below.
Your battery's autonomy
After charging your battery, it is advisable to let it sit for 20 to 30 minutes before use.
The autonomy of your battery depends on several operational factors:
•
Your choice of assistance mode
•
The weight of the user
•
The slope of the route
•
Tyre inflation
•
Wind
•
The pedalling effort provided
•
Starting and number of stops
•
The outside temperature
Caution, precautions
It is recommended that you charge the batteries on a regular basis, or after each use. These batteries
have no memory effect.
To maximize the life of your battery, it is recommended that you:
•
Avoid hot places (ideal charging temperature at 20°C)
•
Leave the battery to cool for 30 minutes after using it
Precautions for use:
•
Only use the battery for this bicycle.
•
Use only the specific charger supplied to charge the battery.
•
Only charge the battery in a well-ventilated area.
52