Adjusting The Brakes - Denver Villette E100 Rm Benutzerhandbuch

At each adjustment operation, check that the front wheel is properly centred with the fork. To set,
close, and open the quick-lock mechanisms, use the following method:
ADJUSTING NUT

Adjusting the brakes

Adjusting the V-brakes
The pads exert a pressure directly on the wheel rims. The intensity of the pressure is controlled by a
lever connected to the brake by a cable. Do not operate the brake lever when the wheel is detached
from the frame.
•
Position the calliper arms vertically and parallel using the correct cable tension. Once the cable
position has been defined, tighten the cable with the appropriate screw.
Calliper arms
•
Align the pad with the side of the wheel rim.
•
Adjust the distance between the pads and the wheel rim, from 1 to 3 mm, to get better braking.
•
Move the rear of the pad slightly away from the wheel rim.
40
OPEN CLOSE
Screw