Led Display - Denver Villette E100 Rm Benutzerhandbuch

LED display

The LED display is as follows:
5.0 On / Off: Press the button to turn the LED
display on and off.
6Km/h button
The bike can be power-assistance at the speed of 6 km/h when you keep pressing this button .
After the motor starts working and the bike running, you could easily pedal and release the button.
Power display on handlebar panel
Under normal state, turn on the power supply, the four LED lights will be displayed from low to high
power levels. When all LED lights are bright, this condition indicates that the electricity is full. If only
the last light is bright, this is a warning, power is getting low to set off soon, the battery needs to be
charged immediately.
Select assistance level on handlebar panel
When the power is on, you can shift to 3 assistance levels, Low, Middle and High. Press the button
MODE to shift the assistance level (Low, middle, and high). Here below the way how to set the
assistance level: When the power is on, the "middle" LED is on, which means the power-assistance is
nd
in the 2 grade. Then you can press the MODE button to choose the Low, Middle and High.
When selecting the high assistance level, meaning more electric power and less human propulsion are
applied to the bike. This level is suitable for uphill, windy day or heavy load riding.
When shifting to middle assistance level, it means electric and human propulsion almost fifty/fifty
applied to this bike. We suggest you select this assistance level, when riding in a regular flat paved
road.
When shifting to low assistance level, it means less electric and more human propulsion being applied
to the bike. Therefore, this is an electric saving level (or economical level). We suggest you select this
level when you ride this bike for leisure, sports or fitness.
48