Handling The Battery - Denver Villette E100 Rm Benutzerhandbuch

Moreover, this power display function can also alert users through these four LED lights, as shown
below:
If the user forgets to turn off the battery switch after five minutes of stopping the ride, the lights of
the four LED will turn one after another. In this way to remind the user to turn off the power
immediately to save energy.
Warning: Please turn off the main switch on the battery, if you stop riding the bike. This is very
important for saving the electric energy, stored in the battery.

Handling the battery

The electric bikes have the battery positioned within the rear carrier (the battery pack is directly
connected to the controller box in the front.
The slider of battery is fixed on carrier.
Then the battery case is locked by the key see the operation details below.
Firstly, please put the battery case along this slider horizontally, then push it into and ensure a snug
fit. Second, make sure the battery pack is firmly pushed into the controller housing and its connector
is securely inserted inside the controller box.
Notice the battery lock
49