Tamiya 1/12th SCALE RADIO CONTROL HIGH PERFORMANCE RACING CAR RM-01 CHASSIS 51486 Montageanleitung Seite 21

TOYOTA
CAUTION
R/C CAR BODY PARTS SET
Body
*Cut away.
CAUTION
'Read carefully and fully understand
the instructions before commencing
Driver
assembly.
'When assembling this kit, tools in-
cluding knives are used. Extra care
should be taken to avoid personal *Cut away.
injury.
'Read and follow the instructions
supplied with paints and/or cement, if
used (not included in kit).
'Keep out of reach of small children.
Children must not be allowed to put
any parts in their mouths, or pull vinyl
bags over their heads. Sensibly dis-
pose of the leftover parts immediately.
Trimming
*Cut Off using scissors or a modeling knife.
Preparing body for painting
*Wash the body thoroughly with detergent
in order to remove any oil, then rinse well
and allow to air dry.
*Wash the body thoroughly with detergent then allow to air dry. Cut
This mark denotes numbers for Tamiya
Paint colors. Paint body from inside using
polycarbonate paints. Paint plastic parts
(Helmet) using plastic paint.
TAMIYA POLYCARBONATE PAINTS
PS-I / White
PS-5 / Black
PS-230fi>'35JV / Gun metal
TAMIYA PLASTIC PAINTS
XF-1 black
*Paint
keep a 30cm distance from the body and apply multiple thin
05 E &
coats rather than just one coat.
www.tamiya.com
1211 02011 TAMIYA
TOM'S
sa5
(201m)
'This body can be used with a chassis that has a 201mm wheelbase.
Trimming
*Make 6mm hole.
*Make 6mm holes.
*Make 3mm hole.
Painting body
— (É)denotes numberOfmaskingseal.
PS-I
PS-5
*Paint driver torso as
you wish.
out masking stickers and mask off windows from inside.
x TV—a
body color from inside. When using spray paints,
84C
*Make 6mm holes.
0
*Cut away.
Rear wing
Inside
Innenseite
Intérieur
c
O
O
(3)
*After paint has dried, remove remaining masking stickers. After
completion of painting, remove protective film.
51486 TOM'S 84C Body (11052803)
ITEM 51486
TAMIYA
Cut away.
PS-23
Gun metal