Num'axes PROTECTION PIE1069 Gebrauchsanleitung Seite 31

Beep Sound
Camera name
Camera password
Camera
auto power off
LCD screen standby
Version
Firmware update
5.5. REPLAY mode: view photos/videos on the camera LCD screen | Delete
photos/videos on the camera | Protect files
To enter the REPLAY mode, slide the switch to the SETUP position (the LCD screen will
light up), then press once on the
The temperature, moon phase, energy level of the solar
panel and camera name will also be imprinted on the
photos/videos.
OFF | ON
You can choose to hear a beep sound or not when you
press a button on the device.
Default name: PIE1069
Press OK to modify the camera name for the camera
(digits/letters). Such function can help you identify from
where and from which camera the photos/videos are.
OFF | ON
Select "ON" then press OK to enable password protection
for your camera (4 characters).
OFF | 3 minutes | 5 minutes | 10 minutes
In SETUP mode, the camera will automatically power off
after 3, 5 or 10 minutes without any press on the keypad.
Slide the switch to the OFF position then back to the
SETUP position if you want to continue the settings.
If you select "OFF", there is no automatic shutdown of
the camera in SETUP mode.
OFF | 1 minute | 3 minutes | 5 minutes
In SETUP mode, the LCD screen will automatically go to
sleep after 1, 3 or 5 minutes of no activity. Press any key
to wake up the screen.
If you select "OFF", the screen does not go to sleep in
SETUP mode.
This parameter shows the following information:
MCU | MCUVER | DSPVER
Allows you to update the firmware loaded in the device.
Guide PIE1069 – Août 2025 – ind. C - 31/144
button.