Next Level Racing ERS3 HYPERCOOL Bedienungsanleitung Seite 25

A)
A) Lift the Seat Slider Lever and slide the Seat Rails all the way back to access the front mounting
43
Bolts on the Seat.
B) Uninstall the Bolts securing the Seat Sliders to the Seat.
A)
NOTE: If the Seat Slider Lever pops out, the individual
Seat Sliders can be manually activated. To do so, use a
cloth to protect your hands, press up on the Zinc Plated
Lever and slide the Seat Rails.
A) Lift the Seat Slider Lever and slide the Seat Rails all the way forward to access the rear mounting
Bolts on the Seat.
44
B) Uninstall the rear M8 Low Profile Bolts securing the Seat Sliders to the Seat, and remove the
assembly including the Seat Spacers.
A)
A) Align the Seat Slider front mounting holes with the threaded inserts on the Seat.
45
B) Bolt through and hand tighten M8 Bolts uninstalled in Step 42 to help align the Seat Rail rear slots.
B)
NOTE: Make sure Seat Sliders
do not splay open after removing
front Bolts.
B)
B)
25
PARTS:
• • NIL
PARTS:
• • NIL
PARTS:
• • 2 x M8 Bolts
Repeat
on Other
Side