Next Level Racing ERS3 HYPERCOOL Bedienungsanleitung Seite 12

SEAT RECLINER ADJUSTMENT
Lift both Seat Recliner Levers to change the angle of the Seat Backrest. Release the levers adjusting
04
the backrest to lock in place.
NLR ERS3 HYPERCOOL CONNECTIONS
FAN SEAT CONNECTIONS
B)
A) Connect the attached Power Cables together located on the back of seat as shown.
05
B) Connect the Power Adapter to the Power Supply.
NLR ERS3 HYPERCOOL OPERATIONS
Press the button switch located on the side of seat to operate the Next Level Racing Hypercool fan.
06
A) Switching down operates fan at Speed 1 Low. B) Switching up operates fan at Speed 2 High.
WARNING: Steps following ERS3 Hypercool seat assembly, show typical ERS3 seat assembly to cockpit frames. These steps do not show cable management.
Please take caution of cable management and ensure cables do not get pinched with seat & frame assembly. Do not place cables on or over seat sliders.
WARNING: The Seat Recliners
are spring loaded, take care when
adjusting to avoid injury.
1
A)
2
B)
OFF
A)
12
PARTS:
• • NIL
PARTS:
• • 1 x Power Adapter
Plug Type A
PARTS:
• • NIL
HIGH
LOW