DUROFIX RV2053-WR45 Produktinformationen Seite 9

Switch Trigger
To turn the tool on, squeeze the trigger switch. To turn the tool off, release the trigger
switch (see fig.2).
NOTE:
The tool is equipped with a soft-starting feature. If the switch off after a proper screw driving
operation, restarting is not possible until after around 0.8 seconds. This prevents accidental retightening of
already tightened screws.
Forward / Reverse Lever
A forward/reverse lever determines the direction of the tool and also serves as a lock
off button.
To select forward rotation, RELEASE THE SWITCH (A) (see Fig.3), and push the
forward/reverse lever (B) (see Fig.3) toward left side of the tool.
To select reverse rotation, RELEASE THE SWITCH (A) (see Fig.3), and push the
forward/reverse lever (B) (see Fig.3) toward right side of the tool.
The centre position of the lever locks the tool in the off position.
NOTE:
When change the position of the lever, making sure the trigger is released.
NOTE:
The lever should be moved in the centre position with no operation.
1English1
A
B
Fig. 1
OPERATION
Fig. 2
English -8- -8
C
C
A