DUROFIX RV2053-WR45 Produktinformationen Seite 18

17. PC or IO
This screen indicates wireless mode. PC mode or IO
mode can be selected. Press
Press / to select mode. Press
EXIT.
Note: Use this configuration along with PC or I/O
receiver. Contact local supplier for more information
about the product.
18. Multiplier
This screen indicates Multiplier type connected in the
tool. Press to enter EDIT mode. Press
type. Press to SAVE and EXIT.
Note: Only turn on this configuration when a multiplier
is installed. Contact local supplier for more information
about the multiplier
19. EPS
This screen indicates EPS function in the tool.
Press to enter EDIT mode. Press
Press to SAVE and EXIT.
When EPS is set off, tool deliver direct force; when EPS
is set on, tool activate Electro-Pulse System to reduce
reaction from torque, there are 3 types of EPS strategy
HJ/ Ergonomic Mode: The mode with the most pulses
per unit time, the slowest and softest pulse speed, is
ideal for use in hard-joint bolt fastening.
Normal/Performance Mode: Provides an average
number of pulses per unit time, which is commonly used
in general bolt fastening
SJ/Efficiency Mode: The mode with the lowest pulse
per unit time and the fastest pulse speed , ideal for soft-
joint bolting and efficient production
1English1
to enter EDIT mode.
to SAVE and
/ to select
/ to select type.
English -17- -17