DUROFIX RV2053-WR45 Produktinformationen Seite 17

13. Group & ID
This screen indicates given group & ID of tool. Group
can be set from 0 to 15. ID can be set from 0 to 9. Press
to enter EDIT mode. Press
to SAVE and EXIT.
Note: Use this configuration along with PC or I/O
receiver. Contact local supplier for more information
about the product.
14. Direction of Fasten
This screen indicates the fasten direction when tool
direction lever in forward position. CW indicates
clockwise meanwhile CCW indicates anti clockwise.
Press to enter EDIT mode. Press
Press to SAVE and EXIT.
15. Password
This screen indicates password setting used in the tool.
Press to enter EDIT mode. Press
change password. Press
16. Pre-sets
This screen indicates configuration setting used in the
tool. There are up to 8 sets to configuration. User need
to load configuration first to programme and memorise
settings. Press
select configuration number that would like to
programme. Press
1English1
/
to SAVE and EXIT.
to enter EDIT mode. Press
to SAVE and EXIT
/ / to set. Press
/ to select.
/ / / to
/ to
English -16- -16