Parameter Setting; Enter Password - Quick Tools Qu969B+ Bedienungsanleitung

2.5. Parameter setting

NOTE: The initial password is "000". Enter the initial password or the correct
password (if changed) to the parameter setting state.
2.5.1 Access to the menu
a) Switch off the soldering station, press the
buttons simultaneously and switch on the
soldering station
Release the buttons. C appears on the display. The station is now in
b)
parameter input mode.

2.5.2 Enter Password

NOTE: If the password is entered incorrectly 3 times, the station switches back
to working mode. Default password: 000
1. Press *: "---" is displayed
2. The password can be entered using the  keys (0-9)
3. First enter the 100 digit, confirm with the ★ button.
4. Then the 10 digit flashes, select the number and confirm it in the same
way as for the 100 digit. Then also for the 1 digit.
5. If the password has been entered correctly, the following settings can
be made.
2.5.3 Settings
If the password has been entered correctly, the station is in setting mode and
displays one of the two menus:

Use the buttons to switch between these menus:
Press the ★ button to select the menu:
01: Parameter menu
02: Password menu
5
USER MANUAL