ECOVACS ROBOTICS DEEBOT OZMO T8 PURE Bedienungsanleitung Seite 6

the Appliance before removing the battery
for disposal of the Appliance.
25. The battery must be removed and discarded
according to local laws and regulations before
disposal of the Appliance.
26. Please dispose of used batteries according
to local laws and regulations.
27. Do not incinerate
is severely damaged.
explode in a fire.
28. When not using the Docking Station for a
long period of time, please unplug it.
29. The Appliance
with the directions
ECOVACS ROBOTICS
or responsible for any damages or injuries
caused by improper use.
30. The robot contains batteries that are only
replaceable by skilled persons.
the robot's battery, please contact Customer
Service.
31. If the robot will not be used for a long time,
power OFF the robot for storage and unplug
the Docking Station.
EN 6
the Appliance even if it
The batteries can
must be used in accordance
in this Instruction Manual.
cannot be held
To replace
32. WARNING:
the battery, only use the detachable
unit CHI 822 provided with the Appliance, or
CHI 918 sold separately as an accessory.
To satisfy RF exposure requirements, a separation
distance of 20 cm
between this device and persons during device
operation.
To ensure compliance, operations at closer than
this distance
used for this transmitter
conjunction
To disable Wi-Fi module on DEEBOT, power the
liable
robot ON.
Place the robot on the Docking Station making
sure the Charging Contacts on DEEBOT and the
Docking Station Pins make a connection.
Press and hold the AUTO
robot for 20 seconds until DEEBOT emits 3 beeps.
To enable Wi-Fi module on DEEBOT, power
the robot OFF and then power ON. The Wi- Fi
module is turned
For the purposes of recharging
or more should
is not recommended.
must not be co-located
with any other antenna or transmitter.
Mode Button
on when DEEBOT
supply
be maintained
The antenna
in
on the
is restarted.