ECOVACS ROBOTICS DEEBOT OZMO T8 PURE Bedienungsanleitung Seite 26

No. Malfunction
DEEBOT misses cleaning
7 spots to be cleaned, or repeats
cleaning the area cleaned.
DEEBOT is making too much
8
noise when cleaning.
DEEBOT is not able
9
to the home Wi-Fi
EN 26
Possible
The cleaning cycle is interfered
objects or barriers on the floor.
DEEBOT is working
floors.
DEEBOT is unable
blocked by furniture
The TrueMapping
DEEBOT is tangled or blocked with debris.
Incorrect home Wi-Fi username
entered.
Incorrect App installed.
DEEBOT is not within range of your home Wi-
to connect
Fi signal.
network.
Network setup started
ready.
DEEBOT does not support 5 GHz Wi-Fi.
Causes
Remove power cords and small objects
by small to ensure cleaning
clean the area missed, please avoid moving DEEBOT
manually or block the path during the cleaning
on slippery polished Make
cleaning.
to reach certain areas
Tidy up the area to be cleaned
or barriers. small objects
Remove the objects that are blocking the TrueMapping
Distance Sensor is blocked.
Distance
Clean
and restart. If the trouble
Customer
or password
Enter the correct home Wi-Fi username
Please download
Make sure DEEBOT is within range of your home Wi-Fi
signal.
Turn
before DEEBOT was
DEEBOT is ready for network
Indicator light flashes slowly.
Make
Wi-Fi
Solutions
efficiency. DEEBOT will automatically
sure the floor wax is dried before
by putting furniture
in their proper place.
Sensor.
DEEBOT as described in section
persists, please contact
Care.
and install ECOVACS HOME App.
ON Power Switch. Press the RESET
setup when its Wi-Fi
sure the robot has been connected
network.
from the floor
cycle.
DEEBOT starts
and
4 Maintenance
and password.
Button.
with 2.4 GHz