hanseatic HBO7212FA1 Bedienungsanleitung Seite 51

Operation
2. Tap the symbol (13) 3 times.
The time display (11) and the icon
the time display flash.
3. Press and hold + (12) and - (14) to set
the required cooking time in 5-minute
increments.
Tap + and - to set the desired cooking
time in increments of one minute.
4. Press and hold the function wheel (9) to
confirm the entry.
To finish cooking prematurely, press
and hold the function wheel (9).
The cooking time can be changed
at any time. The change will take
effect approx. 5 seconds after the
last sensor operation.
The maximum cooking time is 10
hours. If the cooking time is not
set, the oven automatically se-
lects the maximum cooking time.
Timer
88
888
C
F
(14)
Your oven is also equipped with a timer.
You set a specific period, just as you would
with an egg timer. Once the period has ex-
pired, a tone sounds. You can set a dura-
tion of one minute up to 23:59 hours.
Please note that the countdown timer does
not switch the oven on or off. You can also
use the countdown timer when the oven is
not switched on.
1. Tap the symbol 2 times
(13). The numbers and the symbol
on the display time/cooking time (11)
flash.
in
(11)
88
h
min
(13) (12)
2. Press + (12) and - (14) to set the de-
sired time.
In 5 minute increments: Press and hold
+ and -.
In 1 minute increments: Press + and -
briefly.
3. To cancel the operation and return to
the time display: Press and hold the
function wheel (9).
4. Confirm setting: Press the symbol
wait for 10 seconds.
During the countdown, the symbol lights
on the display time/cooking time
stantly.
When the countdown has expired, a
signal will sound and the symbol will
blink for 5 seconds, then stop beeping
automatically.
5. To check or reset the timer setting:
Press the symbol
the time display, press the symbol 3
times or wait 10 seconds.
Start time delay
The oven has a start time delay, which you
can use to set the start and stop times in
advance.
(9)
888
Setting the function and temperature
1. Select the desired function (see chapter
"Selecting functions and starting opera-
tion").
2. Adjust the desired temperature with the
function wheel (9).
Setting the operating time and start time
1. Press the button (13) 3 times.
2. Press the +(12) or -(14) buttons until the
display (11) indicates the desired oper-
ating time. The maximum operating
time is 10 hours.
Page EN-19
or
con-
twice. To return to
(11)
88 88
C
h
min
F
(13)
(14) (12)