Functional Principle - Wika Netris F Betriebsanleitung

4. Design and function

4.4 Functional principle

The instrument uses the Bluetooth
for energy-saving operation. In connected mode, the instrument can be configured
on-site using a mobile device with the "myWIKA wireless device" app.
EN
The last measuring value recorded is transmitted via Bluetooth
"Advertising Mode" with an interval of 1.25 s. The measuring value data can optionally
be removed from the advertising.
Typical applications:
Signal recording
■
Setting the alarm parameters
■
Fault diagnosis
■
Configuration ID (for the identification of changes in the sending rate)
■
Configuration change (e.g. sending rate, alarm parameter etc.)
■
14
For details on the Bluetooth
"Special documentation for BLE communication protocol, model
PEW-1000, item number 14536043" and the additional operating
instructions for radio frequencies for IIoT solutions.
®
Low Energy 4.2 radio standard which is designed
®
connection, see special documentation
WIKA operating instructions radio unit, model NETRIS
®
Low Energy in
®
F