Attaching The Dedicated Stand - Sony IPT-DS2 Bedienungsanleitung

Attaching the dedicated
stand
1 Insert the legs of the dedicated stand
firmly into the mount.
2 To set this unit on the dedicated stand,
align the projections on the mount of
the dedicated stand with the tripod
receptacle of this unit.
¦
Notes
ˎ
Attach the camera to this unit before setting the
unit on the dedicated stand.
ˎ
Use the dedicated stand in a level place.
ˎ
Do not apply a strong force to the dedicated stand.
ˎ
Pressing the button too strongly may cause this
unit to fall off the dedicated stand.
ˎ
Hold the camera when operating it to prevent it
from falling and causing injury.
ˎ
Keep this unit away from people's faces, especially
children's faces¸ to prevent injury in case it falls.
To use a commercially available tripod
You can use a commercially available tripod instead
of the dedicated stand. However, some tripods
cannot be used depending on the shape of the
camera platform.
¦
Notes
ˎ
Do not use force to tighten the tripod screw.
ˎ
When this unit is attached to a tripod, do not lift
the unit or swing the tripod around.
ˎ
Be careful not to pull or exert a force on the foot of
this unit. Doing so can cause a malfunction.
13-GB