SAFETY INFORMATION
Please read this user guide through carefully before using your VibroShaper Compact to prevent injuries and damage to the
device.
• The maximum weight for the device is 100kg.
• Damage to health is possible when overdoing the training activity or training improperly or incorrectly with the device.
• When users have not practised sport for some time, or have heart, circulation or orthopaedic problems, they should consult their
doctor before using the device.
• People with high blood pressure, bronchitis, skin diseases, diabetes, physical limitations or other ailments may only use this
device under the supervision of a doctor.
• The VibroShaper Compact is not suitable for people with osteoporosis, cancer, heart problems, a pacemaker, a prothesis or
another implanted medical device.
• Older people should use this device properly and under supervision.
• The device is not suitable for women who are pregnant or menstruating.
• Children must not be allowed to use this device as a toy.
• This device is not designed to be used by adults or children whose sensory, physical or mental capacity is reduced or restricted,
or who have a lack experience or knowledge, unless they are shown how the device works or are supervised by someone who is
responsible for their safety.
• Do not poke fingers or foreign bodies into the space between the middle and bottom panels of the device.
• Do not use the device after consuming alcohol.
• Wait at least one hour after eating before using the device.
• Before using your VibroShaper Compact , place it on a flat, stable and even floor or mat.
• Ensure it is positioned at least 100 cm from the wall and any other objects nearby. (Figure 4)
• Before using the device, remove jewellery, your mobile phone and any other valuables, keys and sharp
• objects from your person to avoid damage or injuries.
• To avoid injuries, do not jump or kneel down on the device while it is running.
• Only one person at a time may ever stand on the device.
• To prevent the device from tipping over, do not rest more weight on one side than on the other.
• Do not place any other devices or objects on your VibroShaper Compact in addition to your own weight.
• If there are fluctuations in your electricity supply, do not use the device and unplug it immediately.
• Keep the device away from damp areas and direct sunlight, and do not leave it outside.
• Always keep the device away from liquids. Do not touch it with wet hands, move it suddenly or jerkily, and never smoke when
using it.
• If there are problems with the power switch, do not touch the device; if you do, you could get an electric shock.
• Do not use the device if the room temperature exceeds 40 °C.
• Only connect your VibroShaper Compact an electricity supply that is compatible with the device' s technical data and complies
with the instructions.
• Be careful when pressing the power switch.
• Do not kink the cable or touch it with wet hands.
• Stop using the device and unplug it immediately if a thunderstorm starts outside.
• To avoid any electrical interference, do not plug any other devices with a high power demand into the same socket as your
VibroShaper Compact .
• Only transport the device as per the diagram and the instructions regarding this.
• Never store inflammable substances near the device.
• Do not use new and old batteries or batteries of different brands together in the remote control.
• This equipment complies with EN ISO 20957-1 class HB (H = domestic use, B=medium precision).
• Do not cover the device - risk of heat build-up, which could result in fire, electric shock or injury.
• Only use the device for the purpose described here. Do not use any accessories other than those recommended in these
instructions or by the manufacturer.
• Cease use of the device if the cable, plug or socket is damaged. If this has happened, please contact our customer service
(contact information can be found at the end of the instructions).
• Do not carry the device by its cable or use the cable as a handle.
• Never block the air openings on the device. Always keep them free of lint, hair and similar materials.
• Not suitable for outdoor use.
• To switch off the device, switch all functions to OFF, and disconnect it from the power supply.
• Force may be exerted on the resistance band up to a maximum of 8.5 kg or 155 cm. All the exercises outlined in the training plan
are below this maximum.
M28996_Vibroshaper_Manual_20220302_BH.indd 11
M28996_Vibroshaper_Manual_20220302_BH.indd 11
EN
100 cm
100 cm
100 cm
Figure 4
100 cm
11
02.03.22 11:03
02.03.22 11:03