HBK T210 Montageanleitung Seite 35

Index Sub­
index
0x3A 0
0x0002 0x00
0x003B 0x01
5.6.7.7 Assignment of digital switching outputs ("Digital IO")
The DO connection (pin 2, see above) is always available as a digital output.
You can output the status of the limit value switches as digital IO with a switching voltage
of 24 V (max. 50 mA). If you want to do this, you must assign a limit switch to the digital
switching outputs. To do so, open the "Digital IO" menu.
S
"DO pin function" determines which limit value switch is assigned to pin 2 on the plug.
This digital output is always available when the device is in operation.
S
The "Permanent high", "Permanent low" and "Limit switch 1" and "Limit switch 2"
options are available for the output.
T210
ELECTRICAL CONNECTION
Access Data type
R/W U8
Write- UIntegerT
Only
ReadOnly
Size in Name
bytes
1 Tech Select
1 byte System
Command
4 bits Result
(Success or
Error)
Description
1 = SSC1.1
2 = SSC1.2
11 = SSC2.1
12 = SSC2.2
21 = SSC3.1
22 = SSC3.2
31 = SSC4.1
32 = SSC4.2
Trigger teach-in
0x41=Teach SP1
0x42 = Teach
SP2
Confirmation
that the teach-in
process is OK
33