Product Description; Assembly; Mechanical Fastening - Elero Roltop Nutzungsinformation

Product description | Assembly (mechanical attachment)
Symbol Signal
word
NOTE
Important:
Fig. 3 Notation of property damage as well as additional
information
The following example represents the basic structure of a
safety warning:
SIGNAL WORD
Type and source of danger
Explanation of the type and source of the danger
►Measures to prevent the danger.
4

Product description

The RolTop is an electronic tubular motor. It performs paral-
lel axial movements.
‰ Commissioning of the RolTop with elero assembly cable
for setting different functions.
‰ Roller shutter with free ride (torque deactivation)
‰ Relief function for the roller shutter (roller shutter protec-
tion).
‰ Type s_onro with soft stop downwards
• The variant-dependent values of your RolTop can be
removed from the type label.
• The different versions of the RolTop contain different
types of brake systems depending on size and torque.
The result may yield different performance e.g. regarding
access to end positions.
5

Assembly

CAUTION
Personal injury from hot surfaces.
Drive heats up during operation, the drive housing can be
hot. Possible burning of the skin.
►Wear personal protective equipment (gloves).
Triggered by a possible material errors may occur or
impact shock and injury due to a gearbox break, bud break
or a clutch defect.
►Suitable materials are to be used for the construction as
well as perform a sampling inspection by double load test
according to DIN EN 60335-2-97.
Risk of injury due to impact or shock caused by not prop-
erly mounted or latched motor bearings. Hazards caused
by insufficient stability or stability and stored energy (grav-
ity).
►Selection of engine bearing torque specifications.
►Drive must be backed up with all attached backup devices.
Meaning
This symbol warns of a
possible property dam-
age.
This symbol points out
important facts and con-
ditions as well as to addi-
tional information in these
operating and installation
instructions. It also refers
to certain statements that
give additional information
or help you perform a task
easily.
© elero GmbH
►Check for proper latching on engine mounts and correct
tightening torques.
WARNING
Danger of injury due to electric current.
Electric shock possible.
►Electrical work can only be performed by an authorized
electrician.
Danger of injury due to electric current.
Hazardous possibly by parts that have become live in the
error state.
►Electrical connection is described in the operating and
installation instructions including cable bushing.
CAUTION
Risk of injury due to malfunctions due to improper installa-
tion.
Driven by winds and possibly destroyed parts of the appli-
cation.
►For safe operation, the end positions must be set / pro-
grammed.
►Training program of the manufacturer for specialist com-
panies.
NOTE
Loss of power supply, termination of machine parts and
other malfunctions.
►For safe operation, no false mount must be made and the
end position settings must be carried out during commis-
sioning.
Damage to the RolTop due to moisture penetration.
►For devices with protection class IP44, the ends of all
cables or connectors must be protected against the
ingress of moisture. This measure must be implemented
immediately after removal of the RolTop from the original
packaging.
►The drive may only be installed so that it is not irrigated.
Important
In the delivery status (factory setting), the RolTop in com-
missioning mode.
►You have to set the end positions (see chapter 5.6).
5.1

Mechanical fastening

Important preliminary consideration:
The working space around the built-in drive is usually very
small. Therefore, before the mechanical installation provide
an overview of the implementation of the electrical connec-
tion (see Section 5.2) and make any necessary changes
right away.
NOTE
Damage to the electrical wiring by squeezing or tensile
loading.
►Route all electrical cables so that they are not subjected
to crushing or tensile load.
►Note the bending radius of the cables (at least 50 mm).
►Lay the connection cable in a loop downwards to prevent
water running into the drive.
Damage to the drive by the action of impact forces.
►Insert the drive into the shaft, never thrust the drive into
the shaft or smash onto the drive!
►Never allow the drive to fall!
EN | 3