elero RolTop Nutzungsinformation Seite 13

RolTop Roller Blind Drive
Usage information
Table Of Contents
1 Operating and installation instructions
2 General information on the instructions
2.1 Standards and Directives
2.2 Intended use
2.3 Foreseeable misuse
2.4 Warranty and liability
2.5 Customer service of the manufacturer
3 Safety
3.1 General safety instructions
3.2 Layout of the safety guidelines
4 Product description
5 Assembly
5.1 Mechanical fastening
5.2 Electrical connection
5.3 Connection example, RolTop 230 V/50 Hz
5.4 Parallel connection
5.5 Commissioning
5.6 Setting the end positions and the relief
5.6.1 Relief function for the end position(s)
5.6.2 Relief function at the upper stop
5.6.3 Relief function at the lower stop
5.6.4 Changing / Deleting the limit positions
and deleting the discharge function
5.6.5 Four variants of end position settings
5.6.6 Variant A: Upper and lower end position
freely adjustable
5.6.7 Variant B: Fixed upper limit stop / lower
end position freely adjustable 5
5.6.8 Variant C: Fixed upper and lower limit stop
5.6.9 Variant D: Upper end position freely
adjustable, fixed lower limit stop
6 Troubleshooting
7 Servicing
8 Repairs
9 Manufacturer's address
10 Disassembly and disposal
11 Conformity Declaration
12 Energy efficiency
1 13 Technical data and dimensions
1 13.7 RevoLine S
2 13.8 RevoLine M
2 13.9 RevoLine s_onro M
2 13.10 RevoLine L
2
2
Link to this usage information
https://elero.com/en/downloads-service/downloads/
2
2
Safety instructions
2
WARNING: Important safety instructions. For the safety of
3
persons, it is important to follow the general safety instruc-
tions enclosed with each drive unit.
3
https://elero.de/anleitung-sicherheit-antriebe
3
4
4
4
Measure to ensure electrical safety: Qualification as a
'qualified electrician for specified activities' (EFKffT) is re-
4
quired. Failure to fulfil the minimum requirements or disre-
gard may result in personal liability for damage to property
5
and personal injury.
5
RolTop Roller Blind Drive
5
5
1 Operating and installation instructions
Please keep these operating instructions for later use, to be
5
available throughout the life of the product!
The German manual is the original version.
5
All other documents represent the language translations of
the original text.
5
All rights in the case of a patent, utility model or ornamental
design registration are reserved.
2 General information on the instructions
6
The content structure is based on the life cycles of the elec-
tric motor drive (hereinafter referred to as "Product").
6
The manufacturer reserves the right to make changes to
the Specifications stated in these Operating Instructions
6
at any time. These may, in individual cases, be different
from the respective product version, however the functional
6
information will not undergo significant changes or become
invalid. The current version of the Specifications may be
6
requested from the manufacturer at any time. No claims
may be asserted against the manufacturer as a result of the
7
preceding sentence. Deviations from text or picture state-
ments are possible and depend on the technical develop-
7
ment, features, and accessories of the products. Deviating
information on special versions will be explained by the
7
manufacturer in the sales documentation. Other information
shall remain unaffected by these provisions.
I
nstallation requires a qualified
electrician
More information:
elero.de/anleitung-sicherheit-antriebe
138133301_EN_0325
7
7
8
9
10
11