Variable Speed Control; Led Light - Eberth Gb1-R760Eq Bedienungsanleitung

• When inserting the battery, align the rail on the battery with the device groove and
insert the battery pack.
• Slide the battery to the end. A clicking sound is heard.
Risk of injury to operating personnel and others. The battery may slide out.
Always engage the battery correctly!
Never press in or tilt too strongly!

Variable speed control

• Adjust the speed by pressing the on/off switch.
The speed can be adjusted from 0 to 560 rpm. The greater the pressure on the on/off
switch-the higher the speed.

LED light

• Press the on/off switch slightly. The LED lights up.
• Let go of the switch.The LED goes out.
Wipe scratched or soiled LEDs
with a clean, dry cloth
Wipe it off. Otherwise the
luminosity will be reduced.
Risk of eye injury from the LED.
Do not stare into the light or light source!
EN V. 1.0
LED
Fig.3
13