Atlas Copco ITB-P31-12-i06 Sicherheitshinweise Seite 6

Safety Information
Regional Requirements
WARNING
This product can expose you to chemicals including lead,
which is known to the State of California to cause cancer
and birth defects or other reproductive harm. For more
information go to
https://www.p65warnings.ca.gov/
Safety
DO NOT DISCARD - GIVE TO USER
WARNING Read all safety warnings, instructions, il-
lustrations and specifications provided with this
power tool.
Failure to follow all instructions listed below may result
in electric shock, fire, and/or serious injury.
Save all warnings and instructions for future refer-
ence.
WARNING All locally legislated safety rules regard-
ing installation, operation and maintenance shall be
respected at all times.
Statement of Use
• For professional use only.
• This product and its accessories must not be modified in
any way.
• Do not use this product if it has been damaged.
• If the product data or hazard warning signs on the product
cease to be legible or become detached, replace without
delay.
• The product must only be installed, operated and serviced
by qualified personnel in an industrial environment.
Special Precautions
WARNING Crushing Hazard
Use of an open end front part with this tool can cause
crushing of fingers and hands.
This tool must only be used with a closed end front
►
part.
Intended Use
This product is designed for installing and removing threaded
fasteners in wood, metal or plastic.
No other use permitted.
Cable and battery tools: Indoor use only.
6 © Atlas Copco Industrial Technique AB - 9846 0146 00
Safety Signal Words
The safety signal words Danger, Warning, Caution, and
Notice have the following meanings:
DANGER DANGER indicates a hazardous situation which,
if not avoided, will result in death or serious in-
jury.
WARN- WARNING indicates a hazardous situation
ING which, if not avoided, could result in death or
serious injury.
CAUTION CAUTION, used with the safety alert symbol,
indicates a hazardous situation which, if not
avoided, could result in minor or moderate in-
jury.
NOTICE NOTICE is used to address practices not related
to personal injury.
Product Specific Instructions
Installation
Cyber Security
WARNING Risk of system control loss and exposure
of proprietary data
Do not install the product with a direct interface or
►
connection to a Public Network outside the control
of the user of this product, as for example Internet.
Make sure that systems connected to the product are
►
under your full control. Make sure that these inter-
faces and systems are protected by security fire-
wall(s) with relevant and appropriate physical and
digital authentication, access control and other nec-
essary security measures applied in the product's en-
vironment, for example digital network, to securely
access and operate the product.
The product shall be isolated from those parts of the
►
network(s) that are not designed or required for the
product.
General Installation Safety
Refer installation to qualified personnel only.
Hang the tool securely, by for example using a balancer.
When using a suspension yoke, check that it is in good condi-
tion and correctly fastened.
Operation
General Operation Safety
• Due to entanglement risk, do not wear gloves.
• Be prepared of the reaction force which will occur
when the tool is used. Always support the tool's handle
securely in the direction opposite to the spindle rotation,
in order to reduce the effect of sudden torque reaction
during final tightening and initial loosening.
• Never hold the drive, socket or drive extension.
• Operators and maintenance personnel must be physi-
cally able to handle the bulk, weight and power of the
tool.
ITB-P31-12-i06