Powering On/Off; Aux Mode - Niceboy Raze 3 Titan Bedienungsanleitung

1A) or to a USB port on your PC. You can follow the charging progress thanks to the 4 charging
LED diodes (2), after a full charge is complete, all 4 diodes will be lit.

POWERING ON/OFF

Press and hold button (3) for 2 seconds to power on/o the speaker.
CONNECTING TO BLUETOOTH
Press the power on/o button (3) for 2 seconds to power on the speaker. The speaker is
1.
now in pairing mode ready for Bluetooth connection. The pairing mode is signalized by
LED diode ashing blue located on button (3).
Activate Bluetooth on your own device. Select "Niceboy RAZE 3 Titan" from the list of
2.
available devices.
Your device will connect to the speaker. Successful pairing is announced by an audio
3.
signal and ashing of the LED diode (3). Press and hold button (7) to restart the Bluetooth
connection.
PLAYBACK
Play or pause tracks by pressing button (5). Press and hold the volume controls, located on
buttons (4) and (6) to change volume. Press the volume up button to jump to the next track
and the volume down button to jump to the previously played track.

AUX MODE

Insert the enclosed 3.5 mm jack cable into the audio port (12) and the speaker will auto
1.
matically switch to the relevant mode.
Use the device with which you are connected to the speaker to control music playback.
2.
Press and hold the volume controls, located on buttons (4) and (6) to change the volume.
FM MODE
Press the button (3) and FM mode will we announced with an audio signal; press and hold
button (5) to automatically search and save radio stations. You can stop the automatic search
function by pressing the same button (5). While out of the search function you can switch
between radio stations by pressing buttons (4) and (6).
-
13