EN
PACKAGE CONTENTS
Niceboy RAZE Fusion wireless speaker
USB-C charging cable
Instruction manual
PRODUCT DESCRIPTION
1.
Volume increase button / Next track
2.
Microphone
3.
On / off / light mode button / TWS
4.
Operating LED indicator
5.
Playback / Pause / Accept / End / reject a call /
the last number called / Change modes
6.
Volume decrease / Previous track
7.
AUX input for 3.5 mm jack
8.
Input for micro SD card
9.
Charging USB - output, input for USB flash drive
10. LED charging indicator
11. Charging USB-C input
CHARGING
We recommend that you fully charge the speaker
before using it for the first time to maximize battery
life. A full charging takes approximately 3 hours. Low
battery is indicated by an audio signal. To charge the speaker's battery, plug the supplied
USB-C cable into the charging port (11) and connect it to any charging adapter (5 V
voltage and at least 1 A output current) or to a USB port in a PC. Charging is indicated by
a red charging LED (10); the LED turns off once the battery is fully charged.
POWER ON / OFF
To turn the speaker on or off, press and hold button (3) for 3 seconds.
12