Niceboy RAZE 3 TITAN Bedienungsanleitung Seite 14

MICRO SD CARD, USB FLASH DRIVE
The speaker will automatically switch over to the relevant mode once an SD card has been
1.
inserted.
After inserting a USB disk, press button (3) and the USB mode will be announced by an
2.
audio signal.
For both the SD card and USB disk, play or pause tracks by pressing button (5). Press and hold
the volume controls, located on buttons (4) and (6) to change the volume. Press the volume up
button to jump to the next track and the volume down button to jump to the previously played
track. The device supports a maximum data capacity of 32GB and the following audio formats:
MP3, WMA, WAV, APE, FLAC.
TRUE WIRELESS (TWS) CONNECTION
With the help of True Wireless (TWS) you can connect two of the Niceboy RAZE 3 Titan spea-
kers to one device and play music through both simultaneously.
Power on both Niceboy RAZE 3 Titan speakers and ensure they are not connected to any
1.
other Bluetooth device (mobile, laptop, etc.)
Press button (8) on one of the speakers. The LED diode in button (8) will start ashing
2.
orange. An audio signal will announce the successful connection of both speakers and
both speakers' LED diodes will shine orange.
Now you may open the Bluetooth settings on your own device. Select "Niceboy RAZE 3
3.
Titan" from the list of available devices. Successful pairing is announced by an audio signal.
To disconnect the speakers, press and hold button (8).
TELEPHONE CALLS
Press button (7) to accept and then end telephone calls. Press and hold the same button to
decline a telephone call. Press the same button twice to call the last number in your call list.
SIRI / GOOGLE ASSISTANT
Press and hold button (5) to activate Siri / Google Assistant while in standby mode or playing
music.
POWER BANK
The powerbank function is accessible as long as the speaker is powered on. To charge your
device, plug in the USB cable to the outlet charging port (10) and connection the device you
14