Niceboy RAZE POLARIS Bedienungsanleitung Seite 17

CHARGING
We recommend that you fully charge the speaker before using it for the first time
to maximize battery life. A full charging takes approximately 3 hours. Low battery
is indicated by an audio signal. To charge the speaker's battery, plug the supplied
USB-C cable into the charging port (14) and connect it to any charging adapter (5 V
voltage and maximum 2 A output current) or to a USB port in a PC. You can follow
the charging progress thanks to the 4 charging LED diodes (4), after a full charge is
complete, all 4 diodes will be lit.
POWER ON / OFF
To turn the speaker on or off, press and hold button (6) for 3 seconds.
*If the speaker is left inactive, it will turn off automatically after 20 minutes to save power.
CONNECTING TO A DEVICE
1. Press and hold the on/off button (6) for 3 seconds to turn the speaker on. The
speaker is now in pairing mode for wireless connectivity. Pairing mode is indica-
ted by the flashing of the operating LED (5).
2. Activate Bluetooth on your device. Select "Niceboy RAZE Polaris" in the list of
available devices.
3. The device will connect to the speaker. A successful pairing is indicated by a
tone and the operating LED (5) lighting up.
*When switched on again, the speaker automatically connects to the last paired device.
*Long press the button (8) to disconnect the current Bluetooth connection. Long press the
same Bluetooth button to reconnect.
PLAYBACK
To start or pause a track, short-press button (3). Control the volume by short-pre-
ssing button (1) or (2). Long-pressing button (1) or (2) skips to the next or previous
track.
17