Werbung
PERFORMANCE OF YOUR iWINNER BOOSTER SEAT WITH BACKREST
EN
The iWINNER seat has been designed with the latest advances in safety and comfort in mind:
The height of the headrest is adjusted by an automatic pneumatic piston system.
•
It incorporates ISOfix anchorages to improve stability and fixation to the car.
•
The inside of the seat is lined with shock-absorbing material.
•
The backrest has large ventilation channels.
•
It has a spacer element (SPS) that provides extra protection in the event of side impacts.
•
INSTALLATION WITHOUT ISOFIX ANCHORAGES
If you decide to install the iWINNER without the ISOFIX anchorages, simply place it on the car seat, pass the belt through
the belt guide on the side of the headrest (3) (Fig. E1), fasten the car belt buckle and guide the belt through the lower
belt passages (4) (Fig. E2).
INSTALLATION WITH ISOFIX ANCHORAGES
The booster seat with backrest can be attached with the ISOFIX anchorages, thus providing more lateral stability.
The ISOFIX anchorages (5) are extracted by pressing the lever (7). Once pressed, slide the anchorages out (Fig. F1).
•
In some cars, the ISOFIX anchorages are difficult to access or are hidden in the seat foam. Guides (15) are supplied to
make it easier to locate them, insert them before the next step.
Guide the anchorages towards the axles in your car and press until both sides are locked, two green signs on the sides
•
of the anchorages (6) will indicate that they are locked. (Fig. F2).
Pass the belt through the belt guide on the side of the headrest (3) (Fig. F3).
•
18
Werbung
