IPOTOOLS WIG 210P ACDC IGBT Digital Originalbetriebsanleitung Seite 19

INSTRUCTION MANUAL
TIG-210P Welding machine
DANGERS OF ELECTRIC CURRENT
The device can only be connected to the mains with a shielded connection cable. The fuse
must be of the same power as specified in the technical data of the device. The fuse design
must be slow.
Replace damaged torch parts, cable ground, or damaged mains connector immediately.
Replacement of parts on the network, replacement of the connecting cable can only be
performed by an authorized person. Never hold the burner under your arm or otherwise
wrapped around your body. In the event of prolonged work interruptions, switch off the
appliance and close the shielding gas supply.
In the event of an accident, immediately pull out the plug of the connecting cable!
PURPOSE AND USE
The IPOTOOLS TIG-210P is a welding machine with three welding functions. You can use it
for DC MMA, AC TIG and DC / PULSE TIG welding. Any other use may endanger the safety
of the welder or cause the device to malfunction! Use devices contrary to this instruction are
not permitted! Damage to the device resulting from use which was not in accordance with the
instructions is not covered by the warranty statement. With the device it is possible in all
positions weld several materials namely steel, aluminium and aluminium alloys, stainless
steel. It's welding current stable and stepless adjustable. The appliance provides a beautiful
weld, and the welding itself takes place quietly and without spraying. The device is small in
size, light and thus easy to transport.
5