AsViva T16 Betriebsanleitung Seite 48

▲ ▼
Display
SPEED Shows the current speed in a range of 0.8 – 16km/h
TIME Shows the time in a range of 0 – 99
DIST Shows the distance.
CAL Shows the calorie consumption in a range of 0 – 990
Shows the current heart beat, if the hands are placed on the heart rate sensors.
PULSE
If no pulse is measured, the display will show „P"
PROG You can enter the programms P1 ~ P99
Buttons
START By pressing this button, the treadmill will start with 0.8km/h
By pressing this button, the treadmill will stop. If this button is pressed and hold
STOP
for 2 seconds, the system will restart
By pressing these buttons, you can increase or decrease the speed in 0.1km/h
steps. If you hold the buttons longer, the speed will increase or decrease faster
FAST / SLOW
PRG By pressing this button, you can enter to the programms P1 ~P99
By pressing this button, you can enter the mode menu. You can select between
a time countdown which is set to 10 minutes by default. The distance
MODE
countdown is set to 1km by default and the calorie countdown is set to 50 by
default. The values can be edited of course.
By pressing these buttons, you can easily set the speed to 2, 4, 6, 8, 10 or
SPEED KEYS
12km/h.
HANDRAIL By pressing the keys on the handrail, you can increase or decrease the speed
KEYS aswell in 0.1km/h steps.
Description
Description
48