Little Connection Lines; Repairing The Cloth; Trimming; Mixer Test - Flysurfer Speed4 Lotus Bedienungsanleitung

12.02 Little Connection Lines

62
EN
The "Little Connection Line" (LCL)
allows you to quickly exchange a
bridle line and also works as a pre-
determined overload weak point that
prevents the canopy from getting
damaged. Should an LCL break, re-
place it with new one, in the same
colour (same breaking strength) LCL.

12.03 Repairing the Cloth

In case you get a small tear (e.g. through
contact with a sharp object) we have
included a repair kit with your kite. A
special binding agent (silicone sealing
compound) for the Lotus Kite Cloth is
available through Flysurfer sales part-
ners or directly at us. A repair manual is
included with the binding agent. fessio-
nal repair done by us. We can exchange
whole parts of the canopy, so that
there will be no trace of the damage.
Tip: When a tear is
close to a seam (less
than 5cm), we recommend
to sew the damage.

13 TRIMMING

As all lines change length over time,
we have built in a way to correct the
flying characteristics quickly and
easily. It is very important that the
Front and Steering Lines are set-up
equally as described in the bar manual.

13.01 Mixer test

Tip: We recommend to mark
the initial position of the
metal ring with a marker.
So you can always restore
the original position and see
exactly how much the ring
has been adjusted.
Sort out the mixer. Hold the
loops next to the little flags in
line from A-Z in one level.
Tension the mixer and secure
the ends of the front and steering
lines (e.g. an assistant can hold
them). The position of the lines
should not change during the test.