Relaunch; Reverse Launch - Flysurfer Speed4 Lotus Bedienungsanleitung

Attach the Safety Leash to a
52
suitable object (e.g. a post or a
EN board tightly buried in the sand).
Walk to the kite and secure it as
described in "Securing the kite".

07 RELAUNCH

07.01 Reverse Launch

This method works with strong and
light winds and with all Flysurfer
kites. In light winds it is the superior
relaunch method.
Grab the leader lines above the
floaters as high up as you can (do not
grab the flying lines). Make sure that
the bar is the right way up, e.g red side
of the bar on the left. Do not cross over
your hands. This way the bar will be the
right way up after the kite relaunches.
Pull the leader lines as far towards
yourself as possible to reverse the kite
off the water. Sharp tugs or pumping
the lines may help in light winds. If the
kite does not release from the wa-
ter, grab the leader lines higher up.
When the kite is at least one
wingspan above the water, let go of
one of the leader lines. Make sure
you keep hold of the other one.