Safety System; Activating The Qr; Resetting The Kite - Flysurfer Speed4 Lotus Bedienungsanleitung

08 SAFETY SYSTEM

08.01 Activating the QR

The Speed4 Lotus is fitted with the
Frontline Safety (FLS) system. After you
activate your Quick Release, the bar will
slide up the FLS Endline until it reaches
the stopper-knot. The kite will flag out
on this single line and will come to rest
on the water in its normal windrange.

08.02 Resetting the Kite

After leashing out the kite can
easily be reset on the water
and relaunched again.
Work your way up the Safety-
Endline until you get to the bar. Be
careful not to get tangled in the
loose endline. Never wrap the end-
line around your hand or fingers.
If the kite has too much power,
wrap the endline around your har-
ness hook. The increased friction will
make it easier to secure the endline.
Now it is possible to pull the end-
line with both hands, and then to
secure it again with one hand.
When you reach the bar, secure the
endline to your harness hook. This is
done by wrapping the side of the endline
which is under tension two times around
the harness hook and then the loose
side one time in the opposite direction.
55
EN