Flysurfer Speed4 Lotus Bedienungsanleitung Seite 59

Lay the bar on-top of the kite and
a bit of the way in from the tips.
Throw the bridle lines in between
the two halves of the folded kite.
Roll up the kite around the bar.
Make sure that no sharp objects
on the beach damage the cloth.
Close the deflate valves careful-
ly and fold the kite on both sides of
the bar and put it in the kitebag.
Tip: If you do not want to
roll a wet bar into your kite,
there is a method to attach
the bar to the outside of
the bag. Fold the kite in the
middle (tip on tip) and then
roll up the kite, including the
bridle, and put it into the
bag. Then roll up the bar and
attach it to the outside of
the bag.
When setting up the kite
it is recommended to then
unroll the bar first and then
take the kite out of the bag.
59
EN