Handling; Setting Up - Flysurfer Speed4 Lotus Bedienungsanleitung

02 HANDLING

02.01 Setting Up

42
EN Unroll your kite upside down into the
wind and secure it with something that
has no sharp edges and is heavy enough
to hold down the kite for the given wind.
Place the bar far enough away from
all bridle lines on the trailing edge side
of the kite. Make sure that the bar
cannot fall or be pulled into the bridles.
Open the kite and if necessa-
ry, close the deflate valves.
Unroll the lines from your bar
whilst walking away from the kite.
Check your bridle for tangles. Make
sure that none of the lines are caught
around the back of the kite.
Start at the leading edge even-
tually holding up the front lines to
visually check the bridle.